TN-110 115 Toner Reset Instruction

 

Description:

The reset gear on the toner cartridge did not properly contact and reset the New Toner Sensor within the printer. The reset gear will operate only once after the toner cartridge is installed and the position of the gear cannot be reset after installation. To reset the Toner Life Display, a manual reset procedure must be performed. 


Solution:


The following steps will need to be performed to manually reset the toner life.


DCP/MFC Printer Series 


1. Open the front cover then press the Clear/Back button.

2. “Reset Menu” appears on the LCD display. Press the up or down arrow button to select the toner cartridge that needs to be reset.
TN-110BK, C, M, Y (Standard Yield) Toner
 B.TNR-S – Black
 C.TNR-S – Cyan                 
 M.TNR-S – Magenta
 Y.TNR-S – Yellow
TN-115BK, C, M, Y (High Yield) Toner B.TNR-H – Black
 C.TNR-H – Cyan                 
 M.TNR-H – Magenta
 Y.TNR-H – Yellow

3. After selecting the appropriate toner cartridge press the #1 button to reset, press the #2 button to exit. After pressing the #1 button the toner life has been reset.

4. Close the front cover and the operation has now been completed.


HL Printer Series 


1. Open the front cover then press the reprint and cancel buttons at the same time.

2. “Reset Parts Life” appears on the LCD display. Press the up or down arrow button to select the toner cartridge that needs to be reset.

TN-110BK, C, M, Y (Standard Yield) Toner
 B.TNR-S – Black
 C.TNR-S – Cyan                 
 M.TNR-S – Magenta
 Y.TNR-S – Yellow
TN-115BK, C, M, Y (High Yield) Toner B.TNR-H – Black
 C.TNR-H – Cyan                 
 M.TNR-H – Magenta
 Y.TNR-H – Yellow

3. After selecting the appropriate toner cartridge press OK. The toner life has been reset.

4. Close the front cover and the operation has now been completed.

 

-End-