TN-210 Toner Reset Instruction



The reset gear on the toner cartridge did not properly contact and reset the New Toner Sensor within the printer. The reset gear will operate only once after the toner cartridge is installed and the position of the gear cannot be reset after installation. To reset the Toner Life Display, a manual reset procedure must be performed. 


Here is the procedure to Reset Your Brother TN210 Toner Levels:

1. Open the front cover that gives you access to the toners.

2. Press “clear/back button”. You will see “K-TNR-STD” display on the screen.

3. Using the “+” and “-” buttons select the toner you want to reset.
Y-TNR-STD Yellow
M-TNR-STD Magenta

4. Press the “Ok” button.

5. It will display “Ok?” and hit the “Ok” button again to reset the toner.

6. Close the lid.