When you use the TN 730 and TN 760 cartridges that don't have a chip, you will need to remove the chip from the OEM cartridge and replace it into your new, no chip, cartridge. Because your OEM chip was already used previously, your printer will remember it. You need to set your printer to ignore the "Replace Toner" message. Please follow these instruction to ignore the message:


Instruction for MFC printer series

  1.  Press Menu.   

  2.  Press  or  to display the General Setup option, then press OK.   

  3.  Press  or  to display the Replace Toner option, then press OK.  

  4.  Press  or  to display the Continue or Stop option, then press OK.  

  5.  Press Stop/Exit.   

 Note : please try to set the printer to Continue mode, if Continue mode does not work, set instead to Stop mode.



Instruction for HL printer series

  1.  Press (Settings) > All Settings > General Setup > Replace Toner.  

  2.  Press Continue or Stop.  

  3.  Press .   

 Note : please try to set the printer to Continue mode, if Continue mode does not work, set instead to Stop mode.