When you using the TN 730 and TN 760 no chip cartridge, you need to remove the OEM cartridge chip and replace it in to the no chip toner cartridge. Because it is an used cartridge chip, your printer is memory the chip data. You need to set your printer to ignore the Replace Toner message. Please flow the instruction to set your printer. 


Instruction for MFC series of printer 


  1.  Press Menu  

  2.  Press or to display the General Setup option, and then press OK  

  3.  Press or to display the Replace Toner option, and then press OK.  

  4.  Press or to display the Continue or Stop option, and then press OK.  

  5.  Press Stop/Exit  

 Note : please try to set the printer to Continue mode, if continue mode not work set as Stop mode.


Instruction for HL series of printer 

  1.  Press (Settings)>All Settings>General Setup>Replace Toner.  

  2.  Press Continue or Stop.  

  3.  Press  

 


Note : please try to set the printer to Continue mode, if continue mode not work set as Stop mode.


-End-